PAX

1. Disassemble: Remove the mouthpiece and oven lid.
2. Empty the Oven: Brush out any loose material.
3. Clean the Vapor Path: Use a pipe cleaner or the flat tool from a PAX cleaning kit and insert it into the air path from the mouthpiece end of the device. Gently push it back and forth to clean any buildup in the air path.
4. Clean the Oven and Lid: Use a cotton swab dipped in isopropyl alcohol (90% or higher) to wipe down the oven chamber, screen, and the oven lid.
5. Clean the Mouthpiece: Use a cotton swab dipped in isopropyl alcohol to clean around the outside and inside the mouthpiece. If you have a flat mouthpiece, it can be cleaned with a pipe cleaner.
6. Dry and Reassemble: Let all parts air dry completely before reassembling and using your Pax 3.

1. Grind your herb: Use a fine to medium-fine grind.
2. Pack the Oven: Fill the oven chamber with ground herb, packing it firmly but not too tightly.
3. Turn it On: Press the center of the mouthpiece quickly to turn the device on.
4. Set the Temperature: Press and hold the mouthpiece button to enter temperature mode. The lights will change color and cycle through options. Short press the mouthpiece button to cycle through the options and select your preferred temperature. The device has four temperature settings.
5. Heat Up: The lights will pulse while the device heats up.
6. Inhale: Once the lights turn green, take slow, steady draws from the mouthpiece.
7. Turn Off: Press the center of the mouthpiece quickly to turn off the device.

1. Grind your herb: Use a fine to medium-fine grind.
2. Pack the Oven: Open the oven lid and fill the chamber with ground herb, packing it firmly but not too tightly.
3. Turn it On: Press the center of the mouthpiece quickly to turn the device on.
4. Set the Temperature: Press and hold the mouthpiece button to enter temperature mode. The lights will change color and cycle through options. Short press the mouthpiece button to cycle through the options and select your preferred temperature. The device has four temperature settings.
5. Heat Up: The petals will pulse purple while the device heats up.
6. Inhale: Once the petals turn green, take slow, steady draws from the mouthpiece.

Turn Off: Press the center of the mouthpiece quickly to turn off the device.

1. Insert a Pod: Snap a Pax Era Pod into the top of the device.
2. Inhale: Simply draw on the mouthpiece to activate the heating element and inhale the vapor. There are no buttons on the device.
3. Adjust Temperature (Optional): Remove and reinsert the pod quickly to enter temperature select mode. The light will cycle through four heat settings. Remove the pod at your desired temperature.
4. Check Battery: Shake the device gently. The lights will indicate the battery level.

Charge: Use a micro USB cable to connect your device to a power source for charging.